-
Home leave operation
Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
-
Fan only
The unit can be used as fan, blowing air without heating or cooling.
-
Auto cooling-heating changeover
Automatically selects heating or cooling mode to achieve the set temperature.
-
Fan speed steps (3 steps)
Allows to select up to the given number of fan speed.
-
Dry programme
Allows humidity levels to be reduced without variations in room temperature.
-
Air filter
Removes airborne dust particles to ensure a steady supply of clean air.
-
Weekly timer (optional)
Can be set to start heating or cooling anytime on a daily or weekly basis.
-
Infrared remote control (optional)
Starts, stops and regulates the air conditioner from a distance.
-
Wired remote control (optional)
Starts, stops and regulates the air conditioner.
-
Centralised control (optional)
Starts, stops and regulates several air conditioners from one central point.
-
Auto-restart
The unit restarts automatically at the original settings after power failure.
-
Self diagnosis
Simplifies maintenance by indicating system faults or operating anomalies.
-
Multi tenant (optional)
The indoor unit’s main power supply can be turned off when leaving the hotel or office building.
-
Drain pump kit (standard)
Facilitates condensation draining from the indoor unit.
Concealed ceiling unit with high ESP FXMQ50P7
Product features
- High external static pressure up to 200Pa facilitates extensive duct and grille network
- Possibility to change ESP via wired remote control allows optimisation of the supply air volume
- Discretely concealed in the wall: only the suction and discharge grilles are visible
- Reduced energy consumption thanks to specially developed DC fan motor
- Fresh air intake integrated in the same system thus reducing installation cost as no additional ventilation device is required
- Flexible installation, as the air suction direction can be altered from rear to bottom suction
- Standard built-in drain pump with 625mm lift increases flexibility and installation speed
| Unit Type | VRV Indoor Unit |
|---|---|
| Refrigerant Type/GWP | R-410A/2,087.5 |
| Cooling capacity (KW) | 5.6 |
| Heating capacity (KW) | 6.3 |
| External static pressure - Factory set / High | 100/200 |
| Dimensions (mm) | 300(H)x1,000(W)x700(D) |
| Weight (kg) | 35 |
| Power input - 50Hz (KW) | 0.110 |
| Power supply (Hz/V) | 1~/50/220-240 |
